Tie-Dye CD877 – Unisex Tie-Dyed Pullover Hoodie – Spider Silver

The Tie-Dye CD877 is the adult tie-dye pullover hoodie in the Colortone line, an 8.5 oz 80/20 cotton/polyester fleece hoodie that ships already hand tie-dyed, built on the same reactive-dye process as the CD100 tee but on a heavyweight fleece body with a double-lined hood, a front pouch pocket and 1×1 ribbed spandex cuffs and waistband. It is the blank a shop reaches for when a programme needs an authentic tie-dye hoodie for festival and concert merch, streetwear and resale drops, campus and Greek lines, outdoor and camping events, and any decorator who wants the tie-dye look on a fleece body without starting from a solid blank and sending it out for dyeing.

Decorating a tie-dye hoodie combines the opacity problem of printing on a dyed ground with the placement constraints of a hooded sweatshirt. For DTF, the transfer carries its own white layer and lays full-opacity colour over the busy dyed ground at standard heat-press settings, making it the cleanest method; centre the art on the front body above the pouch pocket and keep the press temperature controlled to limit reactive-dye bleed. For screen printing, lay a white underbase so the art reads over the dark dye, cure at the minimum effective temperature, and run a low-bleed underbase on the deep reds and purples; scale the full-front design above the pouch pocket or use the full back as the largest unobstructed canvas. The 8.5 oz fleece nap needs a slightly thicker ink deposit than a tee so the nap does not show through. For embroidery, the 8.5 oz cotton-face fleece is a strong embroidery substrate; place a left-chest logo opposite the drawcord with a cut-away backing and pick thread colours that contrast the dyed ground. For DTG, pre-treat and print a white underbase, and favour bold high-contrast artwork because the busy dyed fleece fights fine detail; keep the print above the pouch pocket. For vinyl and HTV, solid heat-transfer vinyl gives full opacity at a controlled temperature. Sublimation does not apply, since the body is 80% cotton and already piece-dyed.

• Brand: Tie-Dye (Colortone)
• Style: CD877 (Adult Tie-Dyed Pullover Hooded Sweatshirt)
• Fabric: 80% cotton / 20% polyester fleece, hand tie-dyed
• Weight: 8.5 oz/yd2
• Construction: Double-lined hood with matching drawcord. Front pouch pocket. 1×1 ribbed cuffs and waistband with spandex. Double-needle stitching throughout. Hand tie-dyed.
• Fit: Unisex classic fit, pullover hoodie
• Sizes: S, M, L, XL, 2XL, 3XL (size availability varies by pattern, check the product page)
• Colors available: 28 hand-dyed patterns including spider, rainbow, neon, and specialty dye effects; each piece is unique (check current availability on the product page)
• Ordering: available by the piece or by the case; confirm current packing per case for your pattern and size before a large order
• Care: Machine wash cold, separately. Tumble dry low.

Because every CD877 is hand-dyed, the reorder note specific to this style is that the dye pattern is consistent by name but never identical piece to piece, so order a pattern and size run together rather than expecting an exact match to a previous batch. The 80/20 cotton-face fleece gives a better embroidery and print surface than a 50/50 fleece, so the dyed ground takes a crisp stitch line and holds ink detail more cleanly than a polyester-heavy blank. Pair the CD877 with the youth Tie-Dye CD877Y for a matched adult-and-youth tie-dye hoodie programme. Cross-shop the Tie-Dye CD100 when a programme wants the same Colortone dye quality on a lightweight tee body, and the Gildan G185 when the job wants a budget 50/50 solid hoodie for a programme that does not need tie-dye. TheClothingSpace stocks the CD877 at wholesale pricing with bulk discounts that increase as case and unit quantities rise, among the lowest prices online for this style, with fast US shipping on stocked patterns.

Building a tie-dye hoodie programme? Browse all wholesale hoodies and sweatshirts.